Tricure Micro (5 Gallon)

GENERAL INFORMATION TricureMicro� is formulated for the prevention and treatment of hydrophobic soil conditions and optimization of turf water management programs in loamy, native soils. Chemistry is designed to reach the micro pore space in heavy soils.

Upper soil profiles contain varied combinations of soil, sand, thatch and organic amendments. These components interact and influence how water, air and nutrients are received. TricureMicro� soil surfactant is formulated to effectively treat all of these soil and organic surfaces, without the risk of excessive water retention.

DIRECTIONS FOR USE For best results, TricureMicro� applications should begin in early spring, before first signs of heat-related stress appear (zones 1-3). TricureMicro� can also be applied directly as a curative on existing dry areas and LDS.

In warmer climates (zones 4-5), application should be yearround, or when environmental stress conditions begin to impact turf performance.

Immediate watering-in is not necessary to prevent burning as TricureMicro� is non-phytotoxic. For best results, heavy irrigation is recommended when applying to facilitate movement of chemical into the soil.

Application of TricureMicro� via irrigation lines is recommended where possible as chemical is optimally disbursed. Reduced application rates with comparable results are also often possible when applied through irrigation.

See application rate table below for zone specific rate information.

TANK MIXING Although TricureMicro� can be mixed with most chemicals used in turf management, it is recommended that field-testing be done on a small area before spraying to assure safety concerns are met.

Application Rate:
4 to 20 oz. in 2 gallons of water min. per 1,000 sq. ft.