Our products deliver results and lowers your equipment cost by increasing versatility with interchangable shafts and seeder options. The patented vibrating tines deliver results without the extra work of traditional aerification and the fractured soil creats the ideal seedbed making this a multi-functional machine that can be used in many applications around your course.
Vibrating tines loosens the soil all around and underneath each tine fracturing the soil with 9 holes per square foot.
Better subsurface aerification due to total fracturing of the soil � no holes are �punched� into the surface.
No cores or plugs mean less post-aerification cleanup.
Aerating dry soil reduces the expense of pre-irrigating; in fact, the harder the soil, the better the AERA-vator performs.
Swing-hitch allows easy turns while in use.
Bonus: The Universal frame can be fitted with the AERA-vator, AERA-slicer and Multi-tine shafts for additional versatility to manage all areas of course maintenance.
Widths: 40, 60 & 80 inches (available with or without seeder)
Seed placement can be changed from front to rear depending on application and a ground drive allows varable gound speeds for all terrian.
Single pass seedbed preparation (in most conditions)while seeding.
Ability to overseed and primary seed with the same machine.
Two-in-one patented feed wheels for metering both large and small seed varieties. This allows accurate calibration with large and small seed sizes without adding a separate small seedbox.
All units come with a calibration catch tray to collect the seed for accurate calibration. The Catch tray is secured on front of seed box when not in use
Accurate exposure of seed flutes are visually measured by raising the easy access wind deflector. Micro-seed calibration adjustments are made using the adjusting screw to align flute exposure.
Feed wheels are spaced approximately 4 inches apart for uniform seed placement using 15 outlets for the UA-60 and 20 outlets for the UA-80.
Potential uses include aerating / seeding roughs and high traffic areas with the AERA-vator. Use the Slicer Shaft for slicing fairways, tees and greens to reduce heat stress and reduce water run off with no surface disruption. The Multi-tine is used in all areas for seeding fairways, tees and greens or incorporating top-dressing.
Available Options: |