INERT INGREDIENTS: ............................................................ 4%
*The amount of active ingredient in the formulation does not determine the activity. Activity is governed by the type of
film which is formed and this is determined by refinement. The active ingredient in this product is Pinolene ®, a terpenic
NU-FILM-P is a superior STICKING agent designed for use with all pesticides. It is compatible in the
spray tank with all commercially used pesticide products and soluble fertilizers.
NU-FILM-P forms a sticky, elastic film which tenaciously holds the pesticide on the crop foliage and
greatly reduces rainfall and overhead irrigation erosion of the spray residue. The NU-FILM-P film will
withstand about 1 inch of rainfall for seven to ten days, thus insuring that pesticide sprays are not lost
shortly after application. NU-FILM-P will not foam, freeze or clog nozzles. It has been proven effective
when applied by any aircraft or ground sprayer. It improves the initial pesticide deposit and allows excellent
re-distribution of aircraft and concentrate sprayer deposits, to give complete coverage.
Under most conditions, apply sprays containing NU-FILM-P at least one hour, during daylight, before an
anticipated rain. Sunlight for this time period is needed for the film to set.
To increase the efficiency of insecticidal, fungicidal and hormonal herbicide sprays, use 4 to 6 ounces of
NU-FILM-P per acre.
For use in air blast, tree sprayers or hydraulic gun type sprayers, use at the rate of 4 to 6 ozs. per 100
gal. of water. When applied by aircraft, use at the rate of 4 to 6 ozs. per acre for all applications.
To insure maximum activity of Roundup ® (Glyphosate), add NU-FILM-P to the spray mix at the rate of
4 to 6 ounces per acre.
Johnsongrass control may be increased when NU-FILM-P is used at the rate of 1 pt. per acre with
To insure maximum absorption of Foliar Nutrient Sprays, use 4 ounces of NU-FILM-P per acre.
Add NU-FILM-P to the spray tank as it is filling, with the agitator running. To insure good emulsification
of this product, it is advisable to pre-mix NU-FILM-P with water before adding to the spray tank.
Rinse tank, lines and nozzles immediately after spraying, with water. After rinsing, there may still be a
small amount of sticky residue in the tank. This will help to prevent rusting and corrosion. It will not clog
nozzles when sprayer is next used. If spray happens to land on undesired surfaces, such as windows,
cars, application equipment or others, it can be removed with soap and water, before the spray deposit
is dry or with premium grade or white kerosene after the film has dried or set. To remove dried deposits
from painted car surfaces, use standard tar remover products designed for use on painted car finishes.
Use this product in accordance with good agronomic practices, which include utilizing proven spray
equipment set for proper coverage. Do not make applications when temperatures are too hot.
Applications should be made at temperature levels and when other environmental conditions in your area
are such that your experience indicates the application will be compatible and will accomplish the desired
The use of this material being beyond our control and involving elements of risk to human beings, animals
and vegetation, we do not make any warranty, express or implied, as to the effects of such use,
when this product is not used in accordance with the directions as stated on this label