You must login to view the pricing information on this product. Don't have an account with our site? Sign up now! It's instant and free!
Daily maintenance and servicing can be easily performed in the field. The PTO shafts have Ring Lock collars for easy removal and additional safety. All blade spindle assemblies can be easily removed from the deck as a complete unit. The blade spindles are greaseable from the top side of the decks, through lubrication holes in the belt guards. Belt guards have wing nut hold downs for fast removal without tools. All mower deck components are totally interchangeable, for easy servicing.
SOLID CONSTRUCTION = DEPENDABLE SERVICE
YEAR AFTER YEAR
Heavy Duty Blade Spindle assemblies are fabricated and machined to exact tolerances. The spindles turn in greaseable ball bearings. Long support bar holds blade straight to provide a clean, level cut. Steel shield below bottom bearing gives protection from any debris that could otherwise damage seal in bearing. A grease zerk on top of the spindle distributes lubrication to both bearings. All spindle assemblies are interchangeable.
Spindles are greaseable from top side without removing the belt shields. Spindles can be removed form deck without disassembly. Blades are attached to the support bar with 2- 1/2" x 1-3/4" bolts.
3/16" Steel Deck is formed and welded, with bracing at high stress areas to provide maximum structural strength. Open back discharge allows clippings to be dispersed without bunching up, leaving an after cut appearance, second to none.
Automatic Wing Lock system is deactivated from the tractor seat. System control values regulate the lifting and lowering speed of the mower decks. Automatic safety locks hold all decks in place with the hydraulics disconnected. All PTO shafts run at the minimum angle for maximum life expectancy.
Heavy Duty Gear Box, with machined and case hardened gears, transmits power to the mower decks. All PTO shafts have Ring Lock collars instead of pins for additional safety. Oil level dip stick and drain plug allow for easy maintenance.
Main Frame and Wings are fabricated from heavy wall structural tubing with high stress areas reinforced. All pivot locations are greaseable. A greasing schedule is attached for easy maintenance. All PTO shafts run at the minimum angle for maximum life expectancy.
Excellent Floatation is obtained with 12 large low pressure floatation tires, all staggered, providing minimum soil penetration and compaction. Cutting height adjustment can be simply done by removing lynch pin from top of each castor stem and moving the spacers either above or below support tube as required. Wheel hub and castor pivot are greaseable. Replaceable castor pivot bushings. Six rigid, "In-Line" tires keep mower in place while mowing along hillsides.
Narrow Transport Width is achieved without disconnecting PTO shafts. High speed highway transport tires (Optional) allow mower to be moved conveniently to distant locations.
Easily change blades with all decks in raised position. Anti-scalp rollers (Optional on 15 ft) are attached on both wing decks.